Removing Chewing Gum from Public Walkways: A Pressure Guide
Chewing gum is one of the most persistent forms of litter on public walkways. It bonds tightly to pavers, concrete, and asphalt, and it traps dirt until it becomes a dark, unsightly spot. Across Perth, from the shopping strips of Hay Street and Murray Street Mall to station forecourts, university campuses, and suburban town centres, gum stains drag down the look of otherwise well-kept spaces. This guide explains how pressure-based gum removal works, which methods suit which surfaces, and what property managers and councils should consider when planning a cleaning program in 2026.
Why Chewing Gum Is So Difficult to Remove
Gum is made from a synthetic polymer base, usually a form of rubber, combined with resins, softeners, and sweeteners. Once it is dropped onto a walkway and trodden on, it flattens and pushes into the microscopic pores of the surface. Perth's warm climate makes this worse. Summer pavement temperatures regularly climb well above 50°C, which softens the gum and lets it sink deeper. When it cools overnight, it hardens and locks in place.
Ordinary sweeping, mopping, or standard pressure washing at room temperature will usually do very little. The gum needs to be either heated and softened, or frozen and made brittle, before it can be lifted effectively.
Understanding Pressure Methods for Gum Removal
Not every pressure method works the same way. Choosing the right approach depends on the surface type, the age of the gum, and the area to be treated.
Hot Water Pressure Cleaning
Hot water pressure cleaning is widely used for gum on hard surfaces. Water heated to roughly 90°C to 150°C (the upper range is achieved with steam-capable units) softens the gum polymer and weakens its grip on the surface. Pressure then lifts the softened material out of the pores. This method is effective on large areas and can remove ingrained residue that cold water cannot shift.
Steam Cleaning
Steam units deliver high heat with lower water volume. This is useful in areas where runoff needs to be minimised, such as near stormwater drains, around building entrances, or in sensitive landscaped areas. Steam also tends to be gentler on delicate surfaces like decorative pavers, though it can be slower on very large areas.


Cryogenic (Freeze) Removal
Cryogenic methods use a freezing agent, often liquid nitrogen or CO₂-based systems, to make gum brittle so it can be chipped or scraped away cleanly. This approach is useful for spot treatments on premium surfaces, as it avoids heat and large volumes of water. It is less practical for covering large footpaths with hundreds or thousands of spots.
Specialised Gum Removal Machines
Dedicated gum removal machines combine heat, steam, and targeted pressure in a single handheld or trolley-mounted unit. They are designed to treat individual gum spots quickly without requiring a full surface wash, and they typically leave the surrounding surface cleaner than a general-purpose pressure washer would.
Choosing the Right Pressure Setting for Each Surface
Pressure that is too high can etch concrete, blow out the sand between pavers, or leave visible lighter patches. Pressure that is too low simply wastes time. As a general guide, these ranges apply to many common surfaces, though https://rentry.co/pmaqq478 a test patch should always be done first:
- Standard broom-finish concrete: typically tolerates 2,500 to 3,500 PSI when combined with hot water.
- Exposed aggregate concrete: use lower pressure, often 2,000 to 2,500 PSI, to avoid dislodging stones from the surface.
- Clay and concrete pavers: around 1,500 to 2,500 PSI, with attention to joint sand, which may need to be replaced afterwards.
- Natural stone, such as limestone or granite: lower pressure and heat-based methods are preferred, as limestone is porous and can be easily marked or etched.
- Asphalt: use caution with high heat, as it can soften bitumen and cause surface damage. Lower temperatures or cryogenic methods are often safer.
Perth has many limestone-based and tumbled paver surfaces in civic spaces, so surface identification before treatment is an important step, not an optional one.
Step-by-Step Gum Removal Process
A methodical approach delivers better results and reduces the risk of damaging the walkway. A typical professional process follows these steps:
- Survey the area. Identify surface types, mark heavy gum concentrations, and note drains, garden beds, and pedestrian access points.
- Test a small area. Check heat and pressure settings on an inconspicuous section to confirm no damage occurs.
- Set up safety measures. Use barriers, signage, and traffic management where needed, especially in busy CBD or shopping precinct locations.
- Treat the gum. Apply heat, steam, or freezing to each spot, then use targeted pressure or scraping to lift it.
- Rinse and recover wastewater. Collect runoff where required and prevent gum residue and detergents from entering stormwater drains.
- Inspect and finish. Check for remaining residue, ghosting or discolouration, and re-treat if necessary.
Environmental and Regulatory Considerations in Perth
In Western Australia, stormwater drains typically discharge to waterways, such as the Swan and Canning rivers, with little or no treatment. This means wash water containing gum residue, oils, detergents, and grime should not be allowed to enter drains. Contractors working on public land are generally expected to follow local government requirements and the Department of Water and Environmental Regulation's guidance on stormwater protection. Using drain covers, wet vacuum recovery systems, and biodegradable cleaning agents helps meet these expectations.

Councils and building managers should also confirm any permit requirements before starting work in public areas, as well as work health and safety obligations covering hot water, high-pressure equipment, and pedestrian safety.
Preventing Gum Build-Up on Perth Walkways
Removal is only part of the solution. Keeping walkways clean over the long term involves a mix of prevention and scheduled maintenance:
- Install clearly marked gum disposal bins at high-traffic points, including bus stops, train stations, and café precincts.
- Use public awareness signage and campaigns to discourage gum littering.
- Schedule regular maintenance cleaning, often quarterly for busy precincts, rather than waiting for heavy accumulation.
- Consider sealing porous pavers where appropriate, as sealed surfaces can make gum easier to remove later.
- Focus resources on hotspots, such as entrances, queuing areas, and outdoor dining zones.
DIY vs Professional Gum Removal
For a small number of spots on a residential driveway or private path, a handheld scraper, freezing spray, and a hot water rinse may be enough. For commercial properties, shopping centres, schools, and council-managed public spaces, professional equipment offers clear advantages. Commercial-grade machines work faster, apply controlled heat and pressure, and reduce the chance of surface damage. Professionals also handle wastewater recovery, safety management, and compliance, which are difficult to achieve with consumer-grade equipment.
What to Ask When Hiring a Gum Removal Service in Perth
Before engaging a contractor, ask about the following:
Equipment and method: Do they use hot water, steam, or cryogenic systems, and why is that method suited to your surface? Insurance: Confirm they hold current public liability insurance. Wastewater management: Ask how runoff is contained and disposed of. Surface experience: A contractor familiar with limestone, pavers, and exposed aggregate common in Perth will be better prepared. Pricing structure: Clarify whether pricing is per square metre, per hour, or per gum spot, as the best option depends on how widespread the problem is.
Keep Perth Walkways Clean and Welcoming
Clean walkways improve first impressions, support foot traffic for local businesses, and reflect well on the councils and property managers who maintain them. With the right pressure method, correct settings for each surface, and responsible wastewater handling, chewing gum can be removed effectively without harming the pavement beneath. Whether you manage a single commercial frontage or an entire precinct, a planned approach to gum removal in 2026 and into 2027 will keep your public spaces looking their best for the long term.
House Washing Perth
(08) 7828 5551
Ends · ARCHERWPCR262